APD 135 A

Product: AKSA Alternator: AK 4110 Regelsystemen: DSE 6120
Over Product
Aksa power generation system, providing optimum performance, and reliability, for stationary standby, prime power, and continuous duty applications. All generator sets are factory build, and production tested.
Certificaten
  TS ISO 8528
  CE
  SZUTEST
  2000/14/EC
Algemene kenmerken
Modelnaam APD 135 A
Frequentie (HZ) 50
Brandstoftype Diesel
Motormerk en -model AKSA - A4CRX48TI
Alternatormerk en -model Aksa - AK 4110
Configuratiescherm Model DSE 6120
Cabine ACP 6A
3 Fasen, 50 Hz, PF 0.8
Spanning Stand-by vermogen (ESP) Prime Power (PRP) Standby Amper
kVA kW kVA kW
400/231 135 108.00 122 97.60 194.86
Stand-by vermogen (ESP) : Het wordt gebruikt om te voldoen aan de variabele elektrische belastingvereiste in geval van uitval van de betrouwbare netvoeding. ESP voldoet aan ISO 8528-1 Overbelasting is niet toegestaan.

Prime Power (PRP) : Wordt gedefinieerd als het continue bedrijfsvermogen onder variabele belasting. PRP voldoet aan ISO 8528-1 10% overbelasting kan elke 12 uur worden gedaan.
Motorkenmerken
Motor AKSA
Motor model A4CRX48TI
Aantal Cilinders En Gebouw 4 cylinders - in line
Boor En Slag mm 110 X 125
Totale Verplaatsing L 4.75
Aspiratie Turbo Charged and Intercooled (Air to Air)
Compressieverhouding 17.0:1
Nominale snelheid d/dk 1500
Olie capaciteit L 14
Stand-by vermogen (kW/HP) 119/159.59
Prime Power (kW/HP) 107/143.49
Brandstoftype
Diesel
Injectietype en systeem
Direct
Type brandstofpomp
PN Pump
Governor-systeem
Electronic
Bedrijfsspanning (Vdc)
24 Vdc
Batterij en capaciteit (aantal / Ah) 2x60
Koelmethode
Water Cooled
Koelvloeistofcapaciteit (alleen motor / met radiator) (lt) 6/48
Luchtfilter
Dry Type
Brandstofverbruik bij eerste 100% belasting (lt / uur) 27.7
Dynamo specificaties
Fabrikant Aksa
Alternatormerk en -model AK 4110
Frequentie (HZ) Hz 50
Kracht (kVA) kVA 137,5
Ontwerp   Brushless
Spanning V 400
Fase 3
Automatische spanningsregelaar AS460
Voltage regulatie (+/-) 1,5%
Isolatiesysteem H
Bescherming IP22
Nominale vermogensfactor 0.8
Gewicht dynamo (Kg) 492
Koellucht (m³/min) m3 30,84
Grootte en gewicht
Open Type Droog gewicht (kg.)
(kg.)
Lengte
(mm.)
Breedte
(mm.)
Hoogte
(mm.)
Inhoud brandstoftank (lt.) (Lt.)
- - - -
Cabin Group Droog gewicht (kg.)
(kg.)
Lengte
(mm.)
Breedte
(mm.)
Hoogte
(mm.)
Inhoud brandstoftank (lt.) (Lt.)
ACP 6A
1790 2600 1058 1590 180
Standaardfuncties
Heavy duty, water cooled diesel engine 
Radiator with mechanical fan 
Protective grille for rotating and hot parts 
Electric starter and charge alternator 
Starting battery (with lead acid) including rack and cables 
Engine coolant heater 
Steel base frame and anti-vibration isolators 
Spare external fuel tank (open set) 
Flexible fuel connection hoses 
Two bearing, class H alternator 
Industrial exhaust silencer and steel bellows supplied separately 
Static battery charger 
Manual for application and installation 
Generator hardware-opties
ENGINE
  • Oil heater
ALTERNATOR
  • Anti-Condensation Heater
  • Main line circuit breaker
CONTROL SYSTEM
  • Earth fault, single set
  • Charge Ammeter
TRANSFER SWITCH
  • Three or four pole contactor
  • Three or four pole motor operated circuit breaker
OTHER ACCESSORIES
  • Main Fuel Tank
  • Automatic or manual fuel filling system
  • Manual oil drain pump
  • Low and high fuel level alarm
  • Enclosure: weater protective or sound attenuated
  • Trailer
  • Tool kit for maintenance
Regelsystemen: DSE 6120
1. Menu navigation buttons 
2. Close mains button 
3. Main Status and instrumentation display 
4. Alarm LED's 
5. Close generator button 
6. Status LED's 
7. Operation selecting buttons
Apparaten
●DSE, model 6120 Auto Mains Failure control module.
●Battery charger input 198-264 volt, output 27,6 V 5 A (24 V) or 13,8 Volt 5A (12V)
●Emergency stop push button and fuses for control circuits.
Structuur en verf
●Components installed in sheet steel enclosure. Phosphate chemical, pre-coating of steel provides corrosion resistant surface. Polyester composite powder topcoat forms high gloss and extremely durable finish. Lockable and hinged panel door provides easy access to components.
Montage
Control panel is mounted on baseframe with steel stand. Located at the right side of the generator set (When you look at the Gen.Set. from Alternator)
Generator regeleenheid
The DSE 6120 module has been designed to monitor generator frequency, volt, current, engine oil pressure, coolant temperature running hours and battery volts.
Module monitors the mains supply and switch over to the generator when the mains power fails.
The DSE6120 also indicates operational status and fault conditions, Automatically shutting down the Gen. Set and giving true first up fault condition of Gen. Set failure.The LCD display indicates the fault.

Standaardfuncties
●Microprocessor controlled.
●LCD display makes information easy to read.
●Automatically transfers between mains (utilty) and generator power.
●Manual programming on front panel.
●User-friendly set-up and button layout.
●Remote start.
●Event logging (50) showing date and time.
●Controls: Stop/Reset, Manual, Auto, Test, Start, buttons. An additional push button next to the LCD display is used to scroll through the modules' metering displays.

Meetindicatoren
ENGINE
●Engine speed.
●Oil pressure.
●Coolant temperature.
●Run time.
●Battery volts.
●Configurable timing.

GENERATOR
●Voltage (L-L, L-N).
●Current (L1-L2-L3).
●Frequency.
●Gen. Set ready.
●Gen. Set enabled.

MAINS
●Mains ready.
●Mains enabled.
Beveiligingscircuits
WARNING 
●Charge failure. 
●Battery Low/High voltage. 
●Fail to stop. 
●Low /High generator voltage. 
●Under /Over generator frequency. 
●Over /Under speed. 
●Low oil pressure. 
●High coolant temperature. 

SHUT DOWNS 
●Fail to start.
●Emergency stop. 
●Low oil pressure. 
●High coolant temperature. 
●Over /Under speed. 
●Under/over generator frequency. 
●Under/over generator voltage. 
●Oil pressure sensor open. 
●Coolant temperature sensor open. 

ELECTRICAL TRIP 
●Generator over current.


Optie Kenmerken
●Flexible sensor can be controlled with temperature, pressure, percentage (warning/shutdown/electrical trip)
●Local setting parameters and monitoring from PC to control module with USB connection (max 6 mt).
Standaarden
●Elecrical Safety / EMC compatibility
●BS EN 60950 Electrical business equipment.
●BS EN 61000-6-2 EMC immunity standard.
●BS EN 61000-6-4 EMC emission standard
Elektronische acculader
● Battery charger is manufactured with switching-mode and SMD technology and ıt has high efficiency.
● Battery charger models' output V-I characteristic is very close to square and output is 5 amper, 13,8 V for 12 volt and 27,6 V for 24 V . Input 198 - 264 volt AC.
● The charger is fitted with a protection diode across the output.
● Connect charge fail relay coil between positive output and CF output.
● They are equipped with RFI filter to reduce electrical noise radiated from the device.
● Galvanically isolated input and output typically 4kV for high reliability.
Cabine: ACP 6A
Over Product
Sound–attenuated and Weather-protective Enclosures Sound-attenuated and weather protective enclosures for generating sets from Aksa, meet event the sound requirements and provide optimum protection from inclement weather and development by our specialist acoustic engineers. Our modular designed sound insulated canopies provide ease of access for servicing and general maintenance and interchangeable components permitting on-site repair. Enclosures are designed to optimize genset cooling performance, providing you with confidence that genset ratings and ambient capability.
Standaardfuncties


Kastserie Model ACP 6A
Breedte mm. 1058
Lengte mm. 2600
Hoogte mm. 1590
Inhoud brandstoftank (lt.) Lt. 180