APD 17 A

Product: AKSA Alternator: AK 113 Regelsystemen: DSE 6120
Over Product

Aksa power generation system, providing optimum performance, and reliability, for stationary standby, prime power, and continuous duty applications. All generator sets are factory build, and production tested.

  TS ISO 8528
  TS ISO 9001-2008
Algemene kenmerken
Modelnaam APD 17 A
Frequentie (HZ) 50
Brandstoftype Diesel
Motormerk en -model AKSA - A4CRX21
Alternatormerk en -model Aksa - AK 113
Configuratiescherm Model DSE 6120
Cabine ACP 1A
3 Fasen, 50 Hz, PF 0.8
Spanning Stand-by vermogen (ESP) Prime Power (PRP) Standby Amper
kVA kW kVA kW
400/231 17 13.60 16 12.80 24.54
Stand-by vermogen (ESP) : Het wordt gebruikt om te voldoen aan de variabele elektrische belastingvereiste in geval van uitval van de betrouwbare netvoeding. ESP voldoet aan ISO 8528-1 Overbelasting is niet toegestaan.

Prime Power (PRP) : Wordt gedefinieerd als het continue bedrijfsvermogen onder variabele belasting. PRP voldoet aan ISO 8528-1 10% overbelasting kan elke 12 uur worden gedaan.
Motor AKSA
Motor model A4CRX21
Aantal Cilinders En Gebouw 4 cylinders - in line
Boor En Slag mm 85 X 95
Totale Verplaatsing L 2.156
Aspiratie Naturally Aspirated
Compressieverhouding 18:1
Nominale snelheid d/dk 1500
Olie capaciteit L 5.5
Stand-by vermogen (kW/HP) 16.7/22.4
Prime Power (kW/HP) 15.2/20.4
Blokkeer verwarmingsvermogen (Watt) 500
Injectietype en systeem
Type brandstofpomp
Bedrijfsspanning (Vdc)
12 Vdc
Batterij en capaciteit (aantal / Ah) 1x36
Water Cooled
Koelventilatorluchtstroom (m³ / min) 112.64
Koelvloeistofcapaciteit (alleen motor / met radiator) (lt) 5.5/16.8
Dry Type
Brandstofverbruik bij eerste 100% belasting (lt / uur) 4.59
Brandstofverbruik primair 75% belasting (lt / uur) 3.54
Brandstofverbruik bij eerste 50% belasting (lt / uur) 2.6
Dynamo specificaties
Fabrikant Aksa
Alternatormerk en -model AK 113
Frequentie (HZ) Hz 50
Kracht (kVA) kVA 16,3
Ontwerp   Brushless
Spanning V 400
Fase 3
Automatische spanningsregelaar SX460
Voltage regulatie (+/-) 1,5%
Isolatiesysteem H
Bescherming IP22
Nominale vermogensfactor 0.8
Gewicht dynamo (Kg) 109
Koellucht (m³/min) m3 4,26
Grootte en gewicht
Open Type Droog gewicht (kg.)
Inhoud brandstoftank (lt.) (Lt.)
405 1400 760 912
Cabin Group Droog gewicht (kg.)
Inhoud brandstoftank (lt.) (Lt.)
535 1672 823 873 32
Water cooled, Diesel engine 
Radiator with mechanical fan 
Protective grille for rotating and hot parts 
Electric starter and charge alternator 
Starting battery (with lead acid) including rack and cables 
Engine coolant heater 
Base frame design incorporates an integral fuel tank and anti-vibration isolators 
Flexible fuel connection hoses 
Single bearing, class H alternator 
Industrial exhaust silencer and steel bellows supplied separately(for open sets) 
Static battery charger 
Manual for application and installation
Generator hardware-opties
  • Remote Radiator Cooling
  • Fuel-Water Seperator Filter
  • Anti-Condensation Heater
  • Main line circuit breaker
  • Charge Ammeter
  • Three Pole Contactor
  • Four Pole Contactor
  • Three or four pole motor operated circuit breaker
  • Main Fuel Tank
  • Automatic or manual fuel filling system
  • Manual oil drain pump
  • Enclosure: weater protective or sound attenuated
  • Trailer
  • Tool kit for maintenance
Regelsystemen: DSE 6120
1. Menu navigation buttons 
2. Close mains button 
3. Main Status and instrumentation display 
4. Alarm LED's 
5. Close generator button 
6. Status LED's 
7. Operation selecting buttons
●DSE, model 6120 Auto Mains Failure control module.
●Battery charger input 198-264 volt, output 27,6 V 5 A (24 V) or 13,8 Volt 5A (12V)
●Emergency stop push button and fuses for control circuits.
Structuur en verf
●Components installed in sheet steel enclosure. Phosphate chemical, pre-coating of steel provides corrosion resistant surface. Polyester composite powder topcoat forms high gloss and extremely durable finish. Lockable and hinged panel door provides easy access to components.
Control panel is mounted on baseframe with steel stand. Located at the right side of the generator set (When you look at the Gen.Set. from Alternator)
Generator regeleenheid
The DSE 6120 module has been designed to monitor generator frequency, volt, current, engine oil pressure, coolant temperature running hours and battery volts.
Module monitors the mains supply and switch over to the generator when the mains power fails.
The DSE6120 also indicates operational status and fault conditions, Automatically shutting down the Gen. Set and giving true first up fault condition of Gen. Set failure.The LCD display indicates the fault.

●Microprocessor controlled.
●LCD display makes information easy to read.
●Automatically transfers between mains (utilty) and generator power.
●Manual programming on front panel.
●User-friendly set-up and button layout.
●Remote start.
●Event logging (50) showing date and time.
●Controls: Stop/Reset, Manual, Auto, Test, Start, buttons. An additional push button next to the LCD display is used to scroll through the modules' metering displays.

●Engine speed.
●Oil pressure.
●Coolant temperature.
●Run time.
●Battery volts.
●Configurable timing.

●Voltage (L-L, L-N).
●Current (L1-L2-L3).
●Gen. Set ready.
●Gen. Set enabled.

●Mains ready.
●Mains enabled.
●Charge failure. 
●Battery Low/High voltage. 
●Fail to stop. 
●Low /High generator voltage. 
●Under /Over generator frequency. 
●Over /Under speed. 
●Low oil pressure. 
●High coolant temperature. 

●Fail to start.
●Emergency stop. 
●Low oil pressure. 
●High coolant temperature. 
●Over /Under speed. 
●Under/over generator frequency. 
●Under/over generator voltage. 
●Oil pressure sensor open. 
●Coolant temperature sensor open. 

●Generator over current.

Optie Kenmerken
●Flexible sensor can be controlled with temperature, pressure, percentage (warning/shutdown/electrical trip)
●Local setting parameters and monitoring from PC to control module with USB connection (max 6 mt).
●Elecrical Safety / EMC compatibility
●BS EN 60950 Electrical business equipment.
●BS EN 61000-6-2 EMC immunity standard.
●BS EN 61000-6-4 EMC emission standard
Elektronische acculader
● Battery charger is manufactured with switching-mode and SMD technology and ıt has high efficiency.
● Battery charger models' output V-I characteristic is very close to square and output is 5 amper, 13,8 V for 12 volt and 27,6 V for 24 V . Input 198 - 264 volt AC.
● The charger is fitted with a protection diode across the output.
● Connect charge fail relay coil between positive output and CF output.
● They are equipped with RFI filter to reduce electrical noise radiated from the device.
● Galvanically isolated input and output typically 4kV for high reliability.
Cabine: ACP 1A
  1. Steel structures. 
  2. Emergency stop push button. 
  3. Control panel 
  4. Corrosion-resistant locks and hinges. 
  5. oil could be drained via valve and a hose 
  6. Exhaust system in the canopy. 
  7. special large access doors for easy maintanance 
  8. Base frame -fuel tank. 
  9. Lifting Points. 
  10. sound proofing materials 
  11. Power out
Over Product
Sound-attenuated and weather protective enclosures for generating sets from Aksa, meet event the sound requirements and provide optimum protection from inclement weather and development by our specialist acoustic engineers. Our modular designed sound insulated canopies (8 – 275kVA) fit directly to the open generator set to provide ease of access for servicing and general maintenance and interchangeable components permitting on-site repair. Enclosures are designed to optimize genset cooling performance, providing you with confidence that genset ratings and ambient capability.
Compact footprint, low profile design. 
Enclosure, generator set, exhaust system and base-tank are pre-assembled, pre-integrated and shipped as one package 
Body made from steel components treated with polyester powder coating 
Fire retardant foam insulation 
Easy access to all service points 
Exhaust system inside canopy 
Large doors on each side 
Control panel viewing window in a lockable access door 
Emergency stop push button mounted on enclosure exterior 
Cooling fan and battery charging alternator fully guarded 
Fuel fill and battery can only be reached via lockable access doors. 
Lifting points on the top of canopy and base frame 
Customer options available to meet your applications needs. 

Kastserie Model ACP 1A
Breedte mm. 823
Lengte mm. 1672
Hoogte mm. 873
Inhoud brandstoftank (lt.) Lt. 32