ALG 45

Product: LOVOL NG Alternator: ECP 32-3S/4 B Regelsystemen: DSE 6120
Over Product
Aksa power generation system, providing optimum performance, and reliability, for stationary standby, prime power, and continuous duty applications. All generator sets are factory build, and production tested.
  TS ISO 8528
Algemene kenmerken
Modelnaam ALG 45
Frequentie (HZ) 50
Brandstoftype Natural Gas
Motormerk en -model LOVOL NG - 1006NG
Alternatormerk en -model Mecc Alte - ECP 32-3S/4 B
Configuratiescherm Model DSE 6120
Cabine AK40-ALG45
3 Fasen, 50 Hz, PF 0.8
Spanning Stand-by vermogen (ESP) Prime Power (PRP) Standby Amper
kVA kW kVA kW
400/231 45 36.0 41 32.8 64.95
Stand-by vermogen (ESP) : Het wordt gebruikt om te voldoen aan de variabele elektrische belastingvereiste in geval van uitval van de betrouwbare netvoeding. ESP voldoet aan ISO 8528-1 Overbelasting is niet toegestaan.

Prime Power (PRP) : Wordt gedefinieerd als het continue bedrijfsvermogen onder variabele belasting. PRP voldoet aan ISO 8528-1 10% overbelasting kan elke 12 uur worden gedaan.
Motor model 1006NG
Aantal Cilinders En Gebouw 6 cylinders - in line
Boor En Slag mm 100 X 127
Totale Verplaatsing L 5.98
Aspiratie Naturally Aspirated
Compressieverhouding 10.0:3
Nominale snelheid d/dk 1500
Olie capaciteit L 16.1
Stand-by vermogen (kW/HP) 40/44
Blokkeer verwarmingsvermogen (Watt) 1000
Natural Gas
Bedrijfsspanning (Vdc)
12 Vdc
Batterij en capaciteit (aantal / Ah) 1x56
Water Cooled
Koelvloeistofcapaciteit (alleen motor / met radiator) (lt) /23.1
Dry Type
Brandstofverbruik bij eerste 100% belasting (lt / uur) 7,8
Dynamo specificaties
Fabrikant Mecc Alte
Alternatormerk en -model ECP 32-3S/4 B
Frequentie (HZ) Hz 50
Kracht (kVA) kVA 42.5
Spanning V 400
Fase 3
Automatische spanningsregelaar DSR
Voltage regulatie (+/-) 1
Isolatiesysteem H
Bescherming IP23
Nominale vermogensfactor 0.8
Gewicht dynamo (Kg) 209
Koellucht (m³/min) m3 11.8
Grootte en gewicht
Open Type Droog gewicht (kg.)
Inhoud brandstoftank (lt.) (Lt.)
2150 1050 1321
Cabin Group Droog gewicht (kg.)
Inhoud brandstoftank (lt.) (Lt.)
1270 3100 1050 1641 N/A
Heavy duty, water cooled naturalgas engine 
46/50 °C ambient rated radiator with mechanical fan 
Protective grille for fan and rotating parts 
Electric starter and charge alternator 
Starting battery (with lead acid) including rack and cables 
Engine jacket cooling heater 
Base frame design incorporates an integral fuel tank and anti-vibration isolators 
Flexible fuel connection hoses 
Single bearing, class H alternator 
Industrial exhaust silencer and steel belows supplied separately 
Static battery charger 
Manual for use and installation
Generator hardware-opties
• Remote Radiator Cooling
• Low Coolant level alarm
• Anti-Condensation heater
• Over sized alternator
• Main line circuit breaker
• Remote annunciator panel
• Uzağa alarm paneli
• Alarm output relays
• Earth fault, single set
• Charging ammeter
• Üç kutuplu kontaktör
• Four Pole Contactor
• Manual oil drain pump
• Electrical oil drain pump
• Enclosure: weater protective or sound attenuated
• Duct adapter ( on radiator)
• Inlet and outlet motorised louvers
• Tool kit for maintenance
Regelsystemen: DSE 6120
1. Menu navigation buttons 
2. Close mains button 
3. Main Status and instrumentation display 
4. Alarm LED's 
5. Close generator button 
6. Status LED's 
7. Operation selecting buttons
●DSE, model 6120 Auto Mains Failure control module.
●Battery charger input 198-264 volt, output 27,6 V 5 A (24 V) or 13,8 Volt 5A (12V)
●Emergency stop push button and fuses for control circuits.
Structuur en verf
●Components installed in sheet steel enclosure. Phosphate chemical, pre-coating of steel provides corrosion resistant surface. Polyester composite powder topcoat forms high gloss and extremely durable finish. Lockable and hinged panel door provides easy access to components.
Control panel is mounted on baseframe with steel stand. Located at the right side of the generator set (When you look at the Gen.Set. from Alternator)
Generator regeleenheid
The DSE 6120 module has been designed to monitor generator frequency, volt, current, engine oil pressure, coolant temperature running hours and battery volts.
Module monitors the mains supply and switch over to the generator when the mains power fails.
The DSE6120 also indicates operational status and fault conditions, Automatically shutting down the Gen. Set and giving true first up fault condition of Gen. Set failure.The LCD display indicates the fault.

●Microprocessor controlled.
●LCD display makes information easy to read.
●Automatically transfers between mains (utilty) and generator power.
●Manual programming on front panel.
●User-friendly set-up and button layout.
●Remote start.
●Event logging (50) showing date and time.
●Controls: Stop/Reset, Manual, Auto, Test, Start, buttons. An additional push button next to the LCD display is used to scroll through the modules' metering displays.

●Engine speed.
●Oil pressure.
●Coolant temperature.
●Run time.
●Battery volts.
●Configurable timing.

●Voltage (L-L, L-N).
●Current (L1-L2-L3).
●Gen. Set ready.
●Gen. Set enabled.

●Mains ready.
●Mains enabled.
●Charge failure. 
●Battery Low/High voltage. 
●Fail to stop. 
●Low /High generator voltage. 
●Under /Over generator frequency. 
●Over /Under speed. 
●Low oil pressure. 
●High coolant temperature. 

●Fail to start.
●Emergency stop. 
●Low oil pressure. 
●High coolant temperature. 
●Over /Under speed. 
●Under/over generator frequency. 
●Under/over generator voltage. 
●Oil pressure sensor open. 
●Coolant temperature sensor open. 

●Generator over current.

Optie Kenmerken
●Flexible sensor can be controlled with temperature, pressure, percentage (warning/shutdown/electrical trip)
●Local setting parameters and monitoring from PC to control module with USB connection (max 6 mt).
●Elecrical Safety / EMC compatibility
●BS EN 60950 Electrical business equipment.
●BS EN 61000-6-2 EMC immunity standard.
●BS EN 61000-6-4 EMC emission standard
Elektronische acculader
● Battery charger is manufactured with switching-mode and SMD technology and ıt has high efficiency.
● Battery charger models' output V-I characteristic is very close to square and output is 5 amper, 13,8 V for 12 volt and 27,6 V for 24 V . Input 198 - 264 volt AC.
● The charger is fitted with a protection diode across the output.
● Connect charge fail relay coil between positive output and CF output.
● They are equipped with RFI filter to reduce electrical noise radiated from the device.
● Galvanically isolated input and output typically 4kV for high reliability.
Cabine: AK40-ALG45

Kastserie Model AK40-ALG45
Breedte mm. 1050
Lengte mm. 3100
Hoogte mm. 1641
Inhoud brandstoftank (lt.) Lt. N/A