ADG 415

Product: DOOSAN Alternator: ECO 40-1S/4 B Regelsystemen: DSE 7320
Over Product
Aksa power generation system, providing optimum performance, and reliability, for stationary standby, prime power, and continuous duty applications. All generator sets are factory build, and production tested.
  TS ISO 8528
Algemene kenmerken
Modelnaam ADG 415
Frequentie (HZ) 50
Brandstoftype Natural Gas
Motormerk en -model DOOSAN - GV222TI
Alternatormerk en -model Mecc Alte - ECO 40-1S/4 B
Configuratiescherm Model DSE 7320
Cabine MS 86 GZ
3 Fasen, 50 Hz, PF 0.8
Spanning Stand-by vermogen (ESP) Prime Power (PRP) Standby Amper
kVA kW kVA kW
400/231 415 332.00 375 300.00 599.02
Stand-by vermogen (ESP) : Het wordt gebruikt om te voldoen aan de variabele elektrische belastingvereiste in geval van uitval van de betrouwbare netvoeding. ESP voldoet aan ISO 8528-1 Overbelasting is niet toegestaan.

Prime Power (PRP) : Wordt gedefinieerd als het continue bedrijfsvermogen onder variabele belasting. PRP voldoet aan ISO 8528-1 10% overbelasting kan elke 12 uur worden gedaan.
Motor model GV222TI
Aantal Cilinders En Gebouw 12 cylinders - V type
Boor En Slag mm 128 X 142
Totale Verplaatsing L 21.927
Aspiratie Turbo Charged and Intercooled(Water to Air)
Compressieverhouding 10.5:1
Nominale snelheid d/dk 1500
Olie capaciteit L 40
Stand-by vermogen (kW/HP) 385/523
Prime Power (kW/HP) 350/476
Blokkeer verwarmingsvermogen (Watt) 3000
Natural Gas
Bedrijfsspanning (Vdc)
24 Vdc
Batterij en capaciteit (aantal / Ah) 2x143
Laaddynamo (A)
Water Cooled
Koelventilatorluchtstroom (m³ / min) 670
Koelvloeistofcapaciteit (alleen motor / met radiator) (lt) 44/285.3
Dry Type
Brandstofverbruik bij eerste 100% belasting (lt / uur) 95.2
Brandstofverbruik primair 75% belasting (lt / uur) 88.2
Brandstofverbruik bij eerste 50% belasting (lt / uur) 73.4
Dynamo specificaties
Fabrikant Mecc Alte
Alternatormerk en -model ECO 40-1S/4 B
Frequentie (HZ) Hz 50
Kracht (kVA) kVA 400
Ontwerp   4 Pole,  Brushless
Spanning V 400
Fase 3
Automatische spanningsregelaar DER1
Voltage regulatie (+/-) 0.5
Isolatiesysteem H
Bescherming IP23
Nominale vermogensfactor 0.8
Gewicht dynamo (Kg) 1049
Koellucht (m³/min) m3 54
Grootte en gewicht
Open Type Droog gewicht (kg.)
Inhoud brandstoftank (lt.) (Lt.)
4730 3580 1800 2040
Cabin Group Droog gewicht (kg.)
Inhoud brandstoftank (lt.) (Lt.)
MS 86 GZ
5670 5410 1860 2650 N/A
Generator hardware-opties
• Low Coolant level alarm
• Oil heater

• Anti-Condensation heater
• Over sized alternator
• Single Phase ( 4 lead)
• Main line circuit breaker

• Automatic synchronising and power control system ( multi gen-set Parallel )
• Paralel system with mains.
• Remote annunciator panel
• Uzağa alarm paneli
• Alarm output relays
• Remote communication with modem
• Earth fault, single set
• Charging ammeter

• Four Pole Contactor

• Manual oil drain pump
• Electrical oil drain pump
• Enclosure: weater protective or sound attenuated
• Duct adapter ( on radiator)
• Inlet and outlet motorised louvers
• Tool kit for maintenance
• 1500/3000 hours maintenance kit
• Supplied with oil and coolant - 30 °C
• Automatic transfer switch
Regelsystemen: DSE 7320
1. Menu navigation buttons 
2. Close mains button 
3. Main Status and instrumentation display 
4. Alarm LED's 
5. Close generator button 
6. Status LED's 
7. Operation selecting buttons
DSE, model 7320 Auto Mains Failure control module Static battery charger Emergency stop push button and fuses for control circuits
Structuur en verf
Comonents installed in sheet steel enclosure.
Phosphate chemical, pre-coating of steel provides corrosion resistant surface
Polyester composite powder topcoat forms high gloss and extremely durable finish
Lockable hinged panel door provides for easy component access
Control panel is mounted generating set baseframe on robust steel stand or power module. Located at side of generating set with properly panel visibility.
Generator regeleenheid
The DSE 7320 conrol module is a standard addition to our generator sets from 220 kVA upwards and it has been designed to start and stop diesel andgas generating sets that include electronic and non electronic engines.
The DSE 7320 includes the additional capability of being able to monitor a mains (utility) supply and is therefore suitable for controlling a standby generating set in conjunction with an automatic transfer switch.
The DSE7320 also indicates operational status and fault conditions, automatically shutting down the generating set and indicating faults by means of its LCD display on the front panel.

Microprocessor controlled
- 132 x 64 pixel LCD display makes information easy to read
- Front panel programming and also via PC software
- Soft touch membrane keypad and five key menu navigation
- Remote communications via RS232, RS485 and ethernet.
- Event logging (50) showing date and time
- Multiple date and time engine exercise mode and maintenance scheduler
- Engine block heater control.
- Controls; stop, manuel, auto, test, start, mute lamb test/transfer to generator, transfer to mains, menu navigation.

Engine speed
Oil pressure
Coolant temperature
Run time Battery volts
Engine maintenance due

Voltage (L-L, L-N)
Current (L1-L2-L3)
Earth current
kWh, kVAh, kVArh
Phase sequence

Voltage (L-L, L-N)
Charge failure
Battery under voltage
Fail to stop
Low fuel level (opt.)
kW over load
Negative phase sequence
Loss of speed signal

Low oil pressure
High engine temperature
Low engine temperature
Over /Under speed
Under/over generator frequency
Under/over generator voltage
ECU warning

Fail to start
Emergency stop
Low oil pressure
High engine temperature
Low coolant level
Over /Under speed
Under/over generator frequency
Under/over generator voltage
Oil pressure sensor open
Phase rotation

Earth fault
kW over load
Generator over current
Negative phase sequence

Optie Kenmerken
High oil temperature shut down
Low fuel level shut down
Low fuel level alarm
High fuel level alarm

Editional LED module (2548)
Expension relay module (2157)
Expansion input module (2130)
Elecrical Safety / EMC compatibility

BS EN 60950 Electrical business equipment
BS EN 61000-6-2 EMC immunity standard
BS EN 61000-6-4 EMC emission standard
Elektronische acculader
Battery charger is manufactured with switching-mode and SMD technology and it has high efficincy.
Battery charger models' output V-I characteristic is very close to square
2405 has fully output shot circuit protection and ıt can be used as a current source.
2405 charger has high efficiency, long life, low failure rate, light weight and low heat radiated in accordance with linear alternatives.
The charger is fitted with a protection diode across the output.
Charge fail output is available.
Connect charge fail relay coil between positive output and CF output.
Input: 196-264V.
Output: 27,6V 5A or 13,8V 5A.
Cabine: MS 86 GZ

Kastserie Model MS 86 GZ
Breedte mm. 1860
Lengte mm. 5410
Hoogte mm. 2650
Inhoud brandstoftank (lt.) Lt. N/A