APG 100

Product: GM NG Alternator: ECP 34-2S/4 A Regelsystemen: DSE 7320
Over Product
Aksa power generation system, providing optimum performance, and reliability, for stationary standby, prime power, and continuous duty applications. All generator sets are factory build, and production tested.
  TS ISO 8528
Algemene kenmerken
Modelnaam APG 100
Frequentie (HZ) 50
Brandstoftype Natural Gas
Motormerk en -model GM NG - PSI 8.8L
Alternatormerk en -model Mecc Alte - ECP 34-2S/4 A
Configuratiescherm Model DSE 7320
Cabine AK40-APG80
3 Fasen, 50 Hz, PF 0.8
Spanning Stand-by vermogen (ESP) Prime Power (PRP) Standby Amper
kVA kW kVA kW
400/231 100 80 90.00 72 144.34
Stand-by vermogen (ESP) : Het wordt gebruikt om te voldoen aan de variabele elektrische belastingvereiste in geval van uitval van de betrouwbare netvoeding. ESP voldoet aan ISO 8528-1 Overbelasting is niet toegestaan.

Prime Power (PRP) : Wordt gedefinieerd als het continue bedrijfsvermogen onder variabele belasting. PRP voldoet aan ISO 8528-1 10% overbelasting kan elke 12 uur worden gedaan.
Motor GM NG
Motor model PSI 8.8L
Aantal Cilinders En Gebouw 8 cylinders - V type
Boor En Slag mm 110.49 X 114.30
Totale Verplaatsing L 8.800
Aspiratie Naturally Aspirated
Compressieverhouding 10.0:1
Nominale snelheid d/dk 1500
Olie capaciteit L 8,5
Natural Gas
Bedrijfsspanning (Vdc)
12 Vdc
Batterij en capaciteit (aantal / Ah) 1x85
Water Cooled
Koelventilatorluchtstroom (m³ / min) 120
Koelvloeistofcapaciteit (alleen motor / met radiator) (lt) /25,5
Dry Type
Dynamo specificaties
Fabrikant Mecc Alte
Alternatormerk en -model ECP 34-2S/4 A
Frequentie (HZ) Hz 50
Kracht (kVA) kVA 105
Ontwerp   Brushless
Spanning V 400
Fase 3
Automatische spanningsregelaar DSR
Voltage regulatie (+/-) 1
Isolatiesysteem H
Bescherming IP23
Nominale vermogensfactor 0.8
Gewicht dynamo (Kg) 409
Koellucht (m³/min) m3 19.3
Grootte en gewicht
Open Type Droog gewicht (kg.)
Inhoud brandstoftank (lt.) (Lt.)
1180 2150 1050 1543
Cabin Group Droog gewicht (kg.)
Inhoud brandstoftank (lt.) (Lt.)
1410 3100 1050 1641 N/A
Heavy duty, water cooled naturalgas engine 
46/50 °C ambient rated radiator with mechanical fan 
Protective grille for fan and rotating parts 
Electric starter and charge alternator 
Starting battery (with lead acid) including rack and cables 
Engine jacket cooling heater 
Base frame design incorporates an integral fuel tank and anti-vibration isolators 
Flexible fuel connection hoses 
Single bearing, class H alternator 
Industrial exhaust silencer and steel belows supplied separately 
Static battery charger 
Manual for use and installation
Generator hardware-opties
  • Remote Radiator Cooling
  • Low Coolant level alarm
  • Anti-Condensation heater
  • Over sized alternator
  • Main line circuit breaker
  • Remote annunciator panel
  • Uzağa alarm paneli
  • Alarm output relays
  • Earth fault, single set
  • Charging ammeter
  • Üç kutuplu kontaktör
  • Four Pole Contactor
  • Manual oil drain pump
  • Electrical oil drain pump
  • Enclosure: weater protective or sound attenuated
  • Duct adapter ( on radiator)
  • Inlet and outlet motorised louvers
  • Tool kit for maintenance
  • Supplied with oil and coolant - 30 °C
Regelsystemen: DSE 7320
1. Menu navigation buttons 
2. Close mains button 
3. Main Status and instrumentation display 
4. Alarm LED's 
5. Close generator button 
6. Status LED's 
7. Operation selecting buttons
DSE, model 7320 Auto Mains Failure control module Static battery charger Emergency stop push button and fuses for control circuits
Structuur en verf
Comonents installed in sheet steel enclosure.
Phosphate chemical, pre-coating of steel provides corrosion resistant surface
Polyester composite powder topcoat forms high gloss and extremely durable finish
Lockable hinged panel door provides for easy component access
Control panel is mounted generating set baseframe on robust steel stand or power module. Located at side of generating set with properly panel visibility.
Generator regeleenheid
The DSE 7320 conrol module is a standard addition to our generator sets from 220 kVA upwards and it has been designed to start and stop diesel andgas generating sets that include electronic and non electronic engines.
The DSE 7320 includes the additional capability of being able to monitor a mains (utility) supply and is therefore suitable for controlling a standby generating set in conjunction with an automatic transfer switch.
The DSE7320 also indicates operational status and fault conditions, automatically shutting down the generating set and indicating faults by means of its LCD display on the front panel.

Microprocessor controlled
- 132 x 64 pixel LCD display makes information easy to read
- Front panel programming and also via PC software
- Soft touch membrane keypad and five key menu navigation
- Remote communications via RS232, RS485 and ethernet.
- Event logging (50) showing date and time
- Multiple date and time engine exercise mode and maintenance scheduler
- Engine block heater control.
- Controls; stop, manuel, auto, test, start, mute lamb test/transfer to generator, transfer to mains, menu navigation.

Engine speed
Oil pressure
Coolant temperature
Run time Battery volts
Engine maintenance due

Voltage (L-L, L-N)
Current (L1-L2-L3)
Earth current
kWh, kVAh, kVArh
Phase sequence

Voltage (L-L, L-N)
Charge failure
Battery under voltage
Fail to stop
Low fuel level (opt.)
kW over load
Negative phase sequence
Loss of speed signal

Low oil pressure
High engine temperature
Low engine temperature
Over /Under speed
Under/over generator frequency
Under/over generator voltage
ECU warning

Fail to start
Emergency stop
Low oil pressure
High engine temperature
Low coolant level
Over /Under speed
Under/over generator frequency
Under/over generator voltage
Oil pressure sensor open
Phase rotation

Earth fault
kW over load
Generator over current
Negative phase sequence

Optie Kenmerken
High oil temperature shut down
Low fuel level shut down
Low fuel level alarm
High fuel level alarm

Editional LED module (2548)
Expension relay module (2157)
Expansion input module (2130)
Elecrical Safety / EMC compatibility

BS EN 60950 Electrical business equipment
BS EN 61000-6-2 EMC immunity standard
BS EN 61000-6-4 EMC emission standard
Elektronische acculader
Battery charger is manufactured with switching-mode and SMD technology and it has high efficincy.
Battery charger models' output V-I characteristic is very close to square
2405 has fully output shot circuit protection and ıt can be used as a current source.
2405 charger has high efficiency, long life, low failure rate, light weight and low heat radiated in accordance with linear alternatives.
The charger is fitted with a protection diode across the output.
Charge fail output is available.
Connect charge fail relay coil between positive output and CF output.
Input: 196-264V.
Output: 27,6V 5A or 13,8V 5A.
Cabine: AK40-APG80

Kastserie Model AK40-APG80
Breedte mm. 1050
Lengte mm. 3100
Hoogte mm. 1641
Inhoud brandstoftank (lt.) Lt. N/A